[MeeGo-dev] correct way to flash Meego arm5tel 184.108.40.206.20100803.2 image on N900
ameya.palande at nokia.com
Thu Aug 12 04:56:15 PDT 2010
On Thu, 2010-08-12 at 13:25 +0200, ext Radi, Rami wrote:
> Hi all,
> I created the 220.127.116.11.20100803.2 raw file using the
> mic-image-creator command as in
> http://forum.meego.com/showpost.php?p=6580&postcount=90 on Fedora 13.
> Then I wrote it to a 8GB ssd mmc card using the following:
> dd bs=4069
> if=meego-handset-armv5tel-n900-nokia-proprietary-18.104.22.168.20100803.2-22.214.171.12400812.0431-mmcblk0p.raw of=/dev/sdd
In above command, I guess bs=4096 or bs=8192 is good.
> And finally I flashed the generated kernel file using the following
> ./flasher-3.5 -f -k
> "meego-handset-armv5tel-n900-nokia-proprietary-126.96.36.199.20100803.2-vmlinuz-2.6.35~rc6-133.2-n900" -r meego-handset-armv5tel-n900-nokia-proprietary-188.8.131.52.20100803.2.ks
Since you already wrote the meego rootfs to SD card, there is no need to
pass "-r" option to flasher.
"flasher -f -k <kernel> -b" should be enough.
More information about the MeeGo-dev