[MeeGo-dev] Still question on MeeGo on devkit8000

[Dave Neary]

Hi,

Andy Lee wrote:
> This is HOWTO to make devkit8000 work with meego
>  
> 1. update u-boot to 2010.06
> 2. download kernel from 2.6-stable-devkit8000
> 3. get the board-devkit8000.c, id.c, id.h from
> gitorious.org/devkit8000/linux-omap-devkit8000.git and replace the one
> in 2.6-stable-devkit8000.
> ( this step is very important. otherwise you wont get DM9000 and
> USB......etc work )
> 4.build 2.6-stable-devkit8000  ( result: uImage 4.3M)
> 5. Follow meego on beagleboard from scratch and create rootfs and SGX
> driver. 4.0.0
> 6. SD card needs to have SWAP partition.
> 7. set u-boot command omapdss.vrm=0:12M,1:0M,2:0M (in my case, 4M:4M:4M
> does not work for me)

It would be really useful to have step by step guides like this
(complete with notes on various gotchas like we've seen in this thread)
in the wiki where they can be referred to, updates & improved.

Perhaps you could create a Devkit8000 page with these steps and link to
it from http://wiki.meego.com/ARM?

Thanks!
Dave.


-- 
maemo.org docsmaster
Email: dneary at maemo.org
Jabber: bolsh at jabber.org