[Meego-kernel] [PATCH 1/5] Change I2C frequency setting for CDK

[Bin Yang]

Change internal controller frequency to 20Mhz for all I2C ports
except I2C Port 3 which needs to be run at 16.6Mhz from 100Mh

Signed-off-by: Bin Yang <bin.yang at intel.com>
---
 drivers/i2c/busses/i2c-mrst.c |   18 ++++++++++--------
 1 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mrst.c b/drivers/i2c/busses/i2c-mrst.c
index 75963a0..2e48e88 100644
--- a/drivers/i2c/busses/i2c-mrst.c
+++ b/drivers/i2c/busses/i2c-mrst.c
@@ -61,14 +61,14 @@
 
 
 static int speed_mode[6] = {
+	FAST,
+	FAST,
+	FAST,
 	STANDARD,
-	STANDARD,
-	STANDARD,
-	STANDARD,
-	STANDARD,
-	STANDARD
+	FAST,
+	FAST	
 };
-static int ctl_num;
+static int ctl_num = 6;
 module_param_array(speed_mode, int, &ctl_num, S_IRUGO);
 
 /**
@@ -138,11 +138,11 @@ static int mrst_i2c_hwinit(struct mrst_i2c_private *i2c)
 	int err = 0;
 	static const u16 hcnt[NUM_PLATFORMS][NUM_SPEEDS] = {
 		{ 0x75,  0x15, 0x07 },
-		{ 0x1EC, 0x70, 0x06 }
+		{ 0x04b,  0xd, 0x06 }
 	};
 	static const u16 lcnt[NUM_PLATFORMS][NUM_SPEEDS] = {
 		{ 0x7C,  0x21, 0x0E },
-		{ 0x1F3, 0x81, 0x0F }
+		{ 0x052, 0x19, 0x0F }
 	};
 
 	/* Disable i2c first */
@@ -280,6 +280,8 @@ static void mrst_i2c_abort(struct mrst_i2c_private *i2c)
 			"I2C slave device not acknowledge.\n");
 		break;
 	default:
+		dev_err(&adap->dev,
+			"I2C TX abort.\n");
 		;
 	}
 
-- 
1.7.0.4