[Meego-porting] [Meego]Error when booting beagle board with Meego.

[Leo]

I always met the this problem, I'm not sure the same with yours, It's just
boot file damaged.
Generally, I copy from the PC, and insert it to my develop-board again, then
worked.

2010/12/20 <rajeevranjan.kumar at wipro.com>

>  Hi
>
> Facing problem in booting beagle board with Meego. Please suggest how to
> solve this problem.
>
> My beagle board is  based on processor OMAP35x of Texas Instrument (TI).
> Processor OMAP35x
> is integrated with 600MHz ARM Cortex(tm)-A8 core and 412MHz DSP core   which
> can process and calculate the digital signals.
>
>  Created  beagle board image . Finally written image on SD card. Followed
> steps mentioned in wiki page to create image and writing image.
>
> http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch.
>
>
> Then  started my beagle board and pressed boot button to boot using SD
> card
>
> *but this gives below Error:
>
> Texas Instruments X-Loader 1.4.4ss ( Sep   22  2010 - 1 6 :1 2 : 19 )
> Unknown chip: mfr was 0x2c, id was 0xb1
> Unsupported Chip!
>
> *Thanks
> Rajeev
>
> _______________________________________________
> MeeGo-porting mailing list
> MeeGo-porting at lists.meego.com
> http://lists.meego.com/listinfo/meego-porting
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.meego.com/pipermail/meego-porting/attachments/20101220/362d98a0/attachment.html>