[Meego-porting] [MeeGo-dev] [Meego]Error when booting beagle board with Meego.
pundiramit at gmail.com
Mon Dec 20 01:34:02 PST 2010
I got a sort of similar issue when I followed the page
http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch recently and my
u-boot hang forever on a Beagle Rev C3 board.
I don't have the exact logs and the error was something like the following
where u-boot hangs for eternity:
OMAP3 Beagle board + LPDDR/NAND
I looked up google for known issues and found this
So I'm suspecting this MLO(x-loader)/u-boot version conflict issue,
atleast in my case.
On Mon, Dec 20, 2010 at 12:24 PM, Leo <leo20090916 at gmail.com> wrote:
> I always met the this problem, I'm not sure the same with yours, It's just
> boot file damaged.
> Generally, I copy from the PC, and insert it to my develop-board again,
> then worked.
> 2010/12/20 <rajeevranjan.kumar at wipro.com>
>> Facing problem in booting beagle board with Meego. Please suggest how to
>> solve this problem.
>> My beagle board is based on processor OMAP35x of Texas Instrument (TI).
>> Processor OMAP35x
>> is integrated with 600MHz ARM Cortex(tm)-A8 core and 412MHz DSP core which
>> can process and calculate the digital signals.
>> Created beagle board image . Finally written image on SD card. Followed
>> steps mentioned in wiki page to create image and writing image.
>> Then started my beagle board and pressed boot button to boot using SD
>> *but this gives below Error:
>> Texas Instruments X-Loader 1.4.4ss ( Sep 22 2010 - 1 6 :1 2 : 19 )
>> Unknown chip: mfr was 0x2c, id was 0xb1
>> Unsupported Chip!
>> MeeGo-porting mailing list
>> MeeGo-porting at lists.meego.com
> MeeGo-dev mailing list
> MeeGo-dev at meego.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the MeeGo-porting