[MeeGo-SDK] install failed with "mad-admin create -f meego-core-armv7l-1.1"

[Tom Chen]

Hi, Elliot

    thanks for your help. i'll try to clarify what's i want to do. my
purpose is that i could build Meego Handset Ux component "Dialer" with ARM,
so i could use it to instead of the original one in my sd card that i
flashed the meego1.1 on it for get debug info when "Dialer" is running. but
when i build "Dialer" with ARM sysroot like this "mad -t
meego-core-armv7l-1.1* *qmake", i got failed that said "the meegobluetooth
lib can't find in pkg-config PATH", i notice that the libmeegobluetooth is
not install in ARM sysroot. So, i try to install it in ARM sysroot as i
installed it in Meego SDK use "zypper install
meegotouchcp-bluetooth-libmeegobluetooth-devel".

    i think maybe i'll meet with same issue as you said install MADDE
outside Meego SDK. because in ARM sysroot, the libmeegobluetooth is still
missing.

    so, how could i get this build successful? do i need make the
libmeegobluetooth with ARM sysroot by myself ? i want to know how "Dialer"
developer build the application for verify it after fix some bug or add some
new feature.

    hope this is clarification for you.

On Thu, Nov 18, 2010 at 6:15 PM, Elliot Smith <elliot.smith at intel.com>wrote:

> Hello Tom,
>
> On Thu, 2010-11-18 at 02:53 +0000, Tom Chen wrote:
> > Hi,
> >
> >    I got the faile when i install the MADDE with command "mad-admin
> > create -f meego-core-armv7l-1.1" in my Meego SDK environment. my Meego
> > SDK environment set up with
> > meego-handset-sdk-20101012-1.1.80.20101024.1603-sda.raw and Xephyr.
> > the error as below:
>
> I'd like to help, but think it might be best if we could first work out
> what you're trying to achieve: are you trying to create a MADDE ARM
> toolchain for compiling software for MeeGo?
>
> If so, I would recommend using MADDE outside the chroot, and instead
> install it on a Linux host. Trying to use MADDE inside a MeeGo chroot is
> probably going to make things more complicated than they need to be.
>
> There are instructions on setting up the SDK with an ARM toolchain on
> Linux here:
>
> http://wiki.meego.com/SDK/Docs/1.1/Getting_started_with_the_MeeGo_SDK_for_Linux
>
> This should also get you to a position where you can compile software
> using Qt Creator.
>
> If you just want to add stock packages to a MeeGo image, building your
> own image with mic is a good solution.
>
> Apologies in advance if this is not helpful or if I've misinterpreted
> what you're trying to do. Let me know if this isn't helpful and I'll try
> again.
>
> Yours,
> Elliot
>
> --
> Elliot Smith
> Intel Open Source Technology Centre
>
> ---------------------------------------------------------------------
> Intel Corporation (UK) Limited
> Registered No. 1134945 (England)
> Registered Office: Pipers Way, Swindon SN3 1RJ
> VAT No: 860 2173 47
>
> This e-mail and any attachments may contain confidential material for
> the sole use of the intended recipient(s). Any review or distribution
> by others is strictly prohibited. If you are not the intended
> recipient, please contact the sender and delete all copies.
>



-- 
Br
Tom Chen
<tom.chen at teleca.com>
Teleca Chengdu Ltd.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.meego.com/pipermail/meego-sdk/attachments/20101118/deb78cd7/attachment-0003.html>